Drywall Calculator

Work out how many sheets of drywall you need for a room, walls and ceiling, minus doors and windows, plus the screws, joint tape and joint compound, with an optional cost

Last updated: November 16, 2026

How to Use the Drywall Calculator

How to use the drywall calculator

  1. Measure the room. Enter the length, width and wall height in feet. For an odd-shaped room, split it into rectangles and add up the results.
  2. Choose walls only, or walls and ceiling.
  3. Count the doors and windows. The calculator subtracts a standard size for each one.
  4. Pick a sheet size and waste allowance. 4 × 8 sheets are easiest to handle, while 4 × 12 sheets leave fewer joints to finish. Use about 10% waste for simple rooms and 15% or more for rooms with many corners or openings.
  5. Add a price per sheet (optional) to estimate the cost.

The results show the number of sheets, the area covered, and how many screws, rolls of tape and buckets of joint compound to buy, plus a comparison of sheet sizes.

Ceilings and bathrooms may need special board, such as ⅝ inch sag-resistant or moisture-resistant drywall. Check local building codes for fire-rated walls between a garage and the house.

Formula & Methodology

How to calculate drywall for a room

1. Wall area. Add up the length of every wall (the room's perimeter) and multiply by the wall height:

Wall area = 2 × (Length + Width) × Height

2. Ceiling area. If you are hanging the ceiling too:

Ceiling area = Length × Width

3. Subtract openings. Take away about 21 sq ft per door (3 × 7 ft) and 15 sq ft per window (3 × 5 ft), or measure your own.

4. Add waste and divide by the sheet size. Add 10% to 15% for cuts and mistakes, then divide by the area of one sheet and round up:

Sheets = (Area × (1 + Waste %)) ÷ Sheet area

A 4 × 8 sheet covers 32 sq ft, a 4 × 10 covers 40 sq ft and a 4 × 12 covers 48 sq ft.

Worked example

A 12 × 12 ft room with 8 ft walls, one door and two windows, including the ceiling:

  1. Walls: 2 × (12 + 12) × 8 = 384 sq ft
  2. Ceiling: 12 × 12 = 144 sq ft
  3. Openings: 21 + 2 × 15 = 51 sq ft
  4. Net area: 384 + 144 − 51 = 477 sq ft
  5. With 10% waste: 524.7 sq ft ÷ 32 = 16.4, so buy 17 sheets of 4 × 8 drywall

Screws, tape and joint compound

  • Screws: about 32 per 4 × 8 sheet, roughly one per square foot, spaced about 12 inches apart along the edges and 16 inches in the field. Use 1¼ inch coarse-thread screws for ½ inch drywall on wood studs.
  • Joint tape: roughly 370 feet per 1,000 sq ft of drywall. Paper tape usually comes in 500 ft rolls.
  • Joint compound: a 4.5 gallon bucket of premixed all-purpose compound finishes very roughly 400 sq ft with a tape coat and two finish coats. Heavy texture or extra coats need more.

These material figures are estimates. Check the coverage printed on the products you buy.

About Drywall Calculator

Our drywall calculator is a free, easy-to-use tool designed to help youwork out how many sheets of drywall you need for a room, walls and ceiling, minus doors and windows, plus the screws, joint tape and joint compound, with an optional cost. For professionals or those who need quick calculations, our calculator provides accurate results instantly.

Frequently Asked Questions

How many sheets of drywall do I need for a 12 × 12 room?

With 8 ft walls, one door, two windows and the ceiling, a 12 × 12 room needs about 477 sq ft of drywall. With 10% waste that is 17 sheets of 4 × 8, or 11 sheets of 4 × 12.

How do I calculate drywall square footage?

Multiply the room perimeter by the wall height for the walls, add length × width for the ceiling, and subtract doors and windows. Then add 10% to 15% for waste before dividing by the sheet area.

Should I use 4 × 8 or 4 × 12 drywall sheets?

Sheets of 4 × 12 cover more area and leave fewer seams to tape, which saves finishing time. Sheets of 4 × 8 are lighter, fit in more vehicles and are easier for one person to hang, so they suit DIY jobs and small rooms.

How many screws do I need per sheet of drywall?

Plan on about 32 screws for a 4 × 8 sheet, and about 48 for a 4 × 12, which works out to roughly one screw per square foot. Space them about 12 inches apart on the edges and 16 inches apart in the middle.

How much joint compound do I need?

As a rough guide, one 4.5 gallon bucket of premixed joint compound covers about 400 sq ft of drywall for taping plus two finish coats. A 500 sq ft room usually needs two buckets.

How much waste should I allow for drywall?

Allow about 10% for simple rectangular rooms and 15% to 20% for rooms with many corners, angles, soffits or openings. Leftover pieces are handy for small repairs.

What thickness of drywall should I use?

Half inch (½ in) drywall is standard for walls in most homes. Use ⅝ inch on ceilings with wider joist spacing, and fire-rated ⅝ inch Type X where codes require it, such as walls between a garage and living space.

Enter your values
ft
ft
ft

Each standard door removes about 21 sq ft

Each average window removes about 15 sq ft

Longer sheets mean fewer seams to tape, but they are heavier to carry and hang

%

About 10% for simple rooms, 15% or more with many corners or openings

Your result will appear here

Loading…